| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.3540 INCHES MINIMUM AND 0.3640 INCHES MAXIMUM |
| FLANGE WIDTH | 0.0310 INCHES MINIMUM AND 0.0410 INCHES MAXIMUM |
| INNER RING WIDTH | 0.1150 INCHES MINIMUM AND 0.1450 INCHES MAXIMUM |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL | OIL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| OUTER RING OUTSIDE DIAMETER | 0.3123 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.1200 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BEARING BALL ANNULAR,SEALED |
| SEAL QUANTITY | 2 |
| SPECIAL FEATURES | LUBRICATION FILL TO 15% TO MAXIMUM 25% OF THE VEARING VOID. APPLY LUBRICANT AS RECOMMENDED BY LUBRICANT MANUFACTURER |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |