| ALIGNMENT TYPE | RIGID |
| BORE DIAMETER | 0.1250 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.2960 INCHES NOMINAL |
| FLANGE WIDTH | 0.0230 INCHES NOMINAL |
| INNER RING WIDTH | 0.1250 INCHES NOMINAL |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| OUTER RING OUTSIDE DIAMETER | 0.2500 INCHES NOMINAL |
| OUTER RING WIDTH | 0.0937 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BEARING BALL ANNULAR, FOR INSTRUMENT AND PRECISION ROTATING COMPONENTS, DEEP GROOVE, FLANGED, INNER RING EXTENDED, CORROSIN RESISTANT STEEL, ABEC5P |
| RETAINER FABRICATION METHOD | PRESSED |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT | PASSIVATE BALL |
| SURFACE TREATMENT | PASSIVATE INNER RING |
| SURFACE TREATMENT | PASSIVATE OUTER RING |