| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.3750 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.9690 INCHES NOMINAL |
| FLANGE WIDTH | 0.0620 INCHES NOMINAL |
| INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING OUTSIDE DIAMETER | 0.8750 INCHES NOMINAL |
| OVERALL WIDTH | 0.2812 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5618 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5880 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5618 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5880 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5618 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5880 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6855,CLASS 2 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL | STEEL OR COPPER ALLOY RETAINER |
| MATERIAL | RUBBER CHLOROPRENE CLASS CR SEAL |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 2 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |