| MATERIAL | STEEL COMP 416 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A484 ASSN STD SINGLE MATERIAL RESPONSE OR |
| ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYLE DESIGNATOR | DEE |
| OUTSIDE DIAMETER | 5.9400 INCHES MINIMUM AND |
| 6.0000 INCHES MAXIMUM |
| DISTANCE FROM CENTER OF PLATE TO FLAT | 2.3800 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | RAISED SURFACE W/O APERTURE |
| MINOR THICKNESS | 0.7500 INCHES NOMINAL |
| COUNTERBORE DIAMETER | 1.5000 INCHES NOMINAL |
| COUNTERBORE DEPTH | 1.3100 INCHES NOMINAL |
| OVERALL THICKNESS | 2.0600 INCHES NOMINAL |
| OUTSIDE RAISED SURFACE DIAMETER | 4.0596 INCHES MINIMUM AND |
| 4.0600 INCHES MAXIMUM |
| RAISED SURFACE HEIGHT | 2.4400 INCHES NOMINAL |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| MOUNTING HOLE DIAMETER | 0.4080 INCHES NOMINAL |
| MOUNTING HOLE ARRANGEMENT STYLE | FOUR HOLES |
| DISTANCE BETWEEN HOLES ALONG LENGTH | 3.5360 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 3.5360 INCHES NOMINAL |
| DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.7680 INCHES NOMINAL |
| DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.7680 INCHES NOMINAL |
| SURFACE FINISH | 32.0 MICROINCHES BALL |
| SPECIAL FEATURES | ONE SIDE,1 THREADED HOLE 0.0300 IN. MIN,0.0350 IN. MAX DIA |