|
|
|
National Stock Number:
3110-01-287-2315
Federal Supply Class:
3110
National Item Identification Number:
012872315
Description:
CAM FOLLOWER,NEEDLE BEARING
Detail:
An assembly consisting of a roller and stud used to effect a rolling contact with a cam, and convert the reciprocating or oscillating motion to linear motion.
|
Manufacturer Information:
| 8644658-01 | 18894 | AIR ARMAMENT CENTER/ EN | | CF1 1/4 2B 2J | 18894 | AIR ARMAMENT CENTER/ EN | | HR-1-1/4-XB | 07484 | ACCURATE BUSHING COMPANY, INC. | | CRHSB-20 | 60380 | TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT | | CFH-1 1/4-SB-2J | 92563 | MCGILL MANUFACTURING CO, INC |
|
Techincal Specification:
| BEARING SEAL TYPE | CONTACT | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE | | LUBRICATION MATERIAL | GREASE | | OUTER RING WIDTH | 0.7500 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM | | OVERALL LENGTH | 2.0625 INCHES NOMINAL | | OVERALL OUTSIDE DIAMETER | 1.2495 INCHES MINIMUM AND 1.2520 INCHES MAXIMUM | | MATERIAL | PLASTIC POLYAMIDE NYLON SEAL | | MATERIAL | STEEL END PLATE | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL ROLLER | | MATERIAL | STEEL STUD | | NOMINAL THREAD SIZE | 0.7500 INCHES | | SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT,STUD DRILLED AND TAPPED FOR RELUBRICATION; W/ HEXAGON DRIVE HOLE | | SEAL QUANTITY | 2 | | STUD DIAMETER | 0.7500 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM | | STUD LENGTH | 1.2500 INCHES NOMINAL | | STYLE DESIGNATOR | CAM FOLLOWER | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.6250 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 16 |
|
|