| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD 1ST MATERIAL RESPONSE OR SAE ASSN STD 2ND MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD 1ST MATERIAL RESPONSE OR SAE ASSN STD 2ND MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP 440C OR STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP 440C OR STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP 440C OR STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL OUTSIDE DIAMETER | 0.6250 INCHES NOMINAL |
| OVERALL WIDTH | 0.1960 INCHES NOMINAL |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | STATIC THRUST 1100 LBS; DYNAMIC THRUST 506 LBS |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| STYLE DESIGNATOR | SHOULDERED INNER RING, SEPARABLE |
| SURFACE FINISH | GROUND |
| ALIGNMENT TYPE | RIGID |
| BORE DIAMETER | 0.2500 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| CONTACT ANGLE | 17.0 DEGREES NOMINAL |
| INTERNAL FIT-UP DESIGNATION | LOOSE |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD 1ST MATERIAL RESPONSE OR SAE ASSN STD 2ND MATERIAL RESPONSE BALL |