| ALIGNMENT TYPE | RIGID |
| BORE DIAMETER | 3.4992 INCHES MINIMUM AND 3.5000 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0016 INCHES MINIMUM RADIAL AND 0.0026 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL | OIL |
| OVERALL OUTSIDE DIAMETER | 4.1244 INCHES MINIMUM AND 4.1250 INCHES MAXIMUM |
| OVERALL WIDTH | 0.3125 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613 FED SPEC 1ST MATERIAL RESPONSE RETAINER |
| MATERIAL | STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1009 OR STEEL COMP 1019 OR STEEL COMP 1010 OR COPPER ALLOY 172 OR STEEL COMP 1012 OR STEEL COMP 1011 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1020 RETAINER |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL COMP E52100 INNER RING |
| RETAINER FABRICATION METHOD | MACHINED |
| SPECIAL FEATURES | DIAMETRICAL CLEARANCE BEFORE INSTALLATION |
| SPECIFICATION/STANDARD DATA | 05869-710419 MANUFACTURERS SPECIFICATION CONTROL |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| STYLE DESIGNATOR | 4 POINT BALL CONTACT, SOLID INNER AND OUTER RINGS, NON-SEPARABLE |
| SURFACE FINISH | GROUND |