| MATERIAL | STEEL COMP E52100 BALL |
| STEEL COMP E52100 INNER RING |
| STEEL COMP 4130 OUTER RING |
| STEEL COMP 301 RETAINER |
| RUBBER SYNTHETIC SEAL |
| STEEL COMP 4130 SHAFT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| 66 FED STD SINGLE MATERIAL RESPONSE RETAINER |
| MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
| STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| SHANK STYLE | INTERNALLY THREADED W/BEAD |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SURFACE TREATMENT | CADMIUM BALL |
| CADMIUM INNER RING |
| CADMIUM OUTER RING |
| CADMIUM RETAINER |
| CADMIUM SHAFT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BALL |
| QQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING |
| QQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| QQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE RETAINER |
| QQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SHAFT |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| OVERALL LENGTH | 1.7000 INCHES MINIMUM AND |
| 1.7300 INCHES MAXIMUM |
| BORE DIAMETER | 0.1897 INCHES MINIMUM AND |
| 0.1900 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.3180 INCHES MINIMUM AND |
| 0.3380 INCHES MAXIMUM |
| INNER RING WIDTH | 0.4320 INCHES MINIMUM AND |
| 0.4370 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.3650 INCHES MINIMUM AND |
| 1.3850 INCHES MAXIMUM |
| SHANK DIAMETER | 0.3650 INCHES MINIMUM AND |
| 0.3850 INCHES MAXIMUM |
| WIDTH ACROSS FLATS | 0.4280 INCHES MINIMUM AND |
| 0.4480 INCHES MAXIMUM |
| SHANK THREAD LENGTH | 0.7190 INCHES MINIMUM AND |
| 0.7810 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| THREAD QUANTITY PER INCH | 28 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| LUBRICATION MATERIAL | GREASE |
| SPECIAL FEATURES | 0.0004 IN. MAX INTERNAL RADIAL PLAY,8 MICROINCHES MAX SURFACE FINISH FOR BALL AND INNER AND OUTER RINGS,RINGS AND BALLS ROCKWELL C SCALE 60-66,1HOLE 0.093 IN. MIN 0.097 IN. MAX THRU SHANK 0.312 IN. FROM SHANK END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 97499 |
| DESIGN CONTROL REFERENCE | 205-060-733-7 |