|
|
|
National Stock Number:
3110-00-726-6244
Federal Supply Class:
3110
National Item Identification Number:
007266244
Description:
BEARING,BALL,ROD END
Detail:
A SPECIAL SINGLE OR MULTIPLE-ROW BALL BEARING, RIGID OR SELF-ALIGNING, AND CONSTRUCTED WITH EITHER A SOLID OR HOLLOW SHANK, INTERNALLY OR EXTERNALLY THREADED.
|
Manufacturer Information:
| NAS659-3-5 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | RA3M5 | 21335 | TIMKEN CO | | RA3M5FS237 | 21335 | TIMKEN CO | | RA3M5FS237 | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. |
|
Techincal Specification:
| ALIGNMENT TYPE | SELF-ALIGNING | | BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM | | INNER RING WIDTH | 0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM | | LENGTH FROM BORE CENTER TO SHANK END | 1.9280 INCHES MINIMUM AND 1.9480 INCHES MAXIMUM | | LUBRICATION MATERIAL | GREASE | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL BALL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL SHAFT | | NOMINAL THREAD SIZE | 0.312 INCHES | | OUTER RING WIDTH | 0.4360 INCHES NOMINAL | | OVERALL LENGTH | 2.3435 INCHES MAXIMUM | | OVERALL OUTSIDE DIAMETER | 0.7810 INCHES NOMINAL | | SEAL QUANTITY | 2 | | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL | | SELF-ALIGNMENT LOCATION | INTERNAL | | SHANK DIAMETER | 0.3125 INCHES NOMINAL | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM | | SPECIAL FEATURES | 0.0620 IN. W BY 0.0500 IN. DEEP BY 1.3750 IN. LG SLOT IN SHANK | | STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED | | SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNF |
|
|