|
|
|
National Stock Number:
3110-00-684-1165
Federal Supply Class:
3110
National Item Identification Number:
006841165
Description:
BEARING,BALL,ROD END
Detail:
A SPECIAL SINGLE OR MULTIPLE-ROW BALL BEARING, RIGID OR SELF-ALIGNING, AND CONSTRUCTED WITH EITHER A SOLID OR HOLLOW SHANK, INTERNALLY OR EXTERNALLY THREADED.
|
Manufacturer Information:
| 3110PL0927891 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 6828146 | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | 6828146 | 21335 | TIMKEN CO | | 6828146 | 24617 | GENERAL MOTORS CORP | | 6828146 | 63005 | ROLLS-ROYCE CORPORATION | | 6828146 | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. | | ABR4F-6G(P) | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | REP4F5 E9642TV148S6 | 21335 | TIMKEN CO | | REP4F5E9642 | 21335 | TIMKEN CO | | REP4FS FS210 | 21335 | TIMKEN CO | | REP4F5E9642 | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. | | REP4F5 E9642TV148S6 | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. | | 6828146 | 73342 | ALLISON TRANSMISSION INC | | ABR4F-6G(P) | 83086 | NEW HAMPSHIRE BALL BEARINGS INC |
|
Techincal Specification:
| ALIGNMENT TYPE | SELF-ALIGNING | | BORE DIAMETER | 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | LENGTH FROM BORE CENTER TO SHANK END | 1.4690 INCHES NOMINAL | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 8620 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING | | MATERIAL | STEEL COMP E52100 BALL | | MATERIAL | STEEL COMP E52100 INNER RING | | MATERIAL | STEEL COMP 8620 OUTER RING | | INNER RING WIDTH | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.3125 INCHES | | OUTER RING WIDTH | 0.4380 INCHES NOMINAL | | OVERALL LENGTH | 1.9380 INCHES NOMINAL | | OVERALL OUTSIDE DIAMETER | 0.9380 INCHES NOMINAL | | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL | | SELF-ALIGNMENT LOCATION | INTERNAL | | SHANK BORE DEPTH | 0.7500 INCHES NOMINAL | | SHANK BORE DIAMETER | 0.4380 INCHES NOMINAL | | SHANK DIAMETER | 0.5000 INCHES NOMINAL | | SHANK STYLE | HOLLOW | | STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL | | SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|