|
|
|
National Stock Number:
3110-00-652-0623
Federal Supply Class:
3110
National Item Identification Number:
006520623
Description:
BEARING,BALL,ROD END
Detail:
A SPECIAL SINGLE OR MULTIPLE-ROW BALL BEARING, RIGID OR SELF-ALIGNING, AND CONSTRUCTED WITH EITHER A SOLID OR HOLLOW SHANK, INTERNALLY OR EXTERNALLY THREADED.
|
Manufacturer Information:
| 905080 | 93835 | PARKER HANNIFIN CORPORATION | | AN946RE4M6 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | GB525L4A | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | BACB10A436 | 81205 | THE BOEING COMPANY | | BACB10A75 | 81205 | THE BOEING COMPANY | | EAB760 | 81996 | U S ARMY AVIATION AND MISSILE COMMAND | | REP4M6 | 21335 | TIMKEN CO | | REP4M6FS210 | 21335 | TIMKEN CO | | REP4M6FS210FS160 | 21335 | TIMKEN CO | | REP4M6FS210MILG3278 | 21335 | TIMKEN CO | | REP4M6-1 | 38443 | SKF USA INC. | | REP4M6-1B100B000075K0000J | 38443 | SKF USA INC. | | REP4M6-1E104B000075K00000 | 38443 | SKF USA INC. | | REP4M6FS210 | F0563 | SCHAEFFLER FRANCE |
|
Techincal Specification:
| ALIGNMENT TYPE | SELF-ALIGNING | | BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 0.2500 INCHES NOMINAL | | LENGTH FROM BORE CENTER TO SHANK END | 1.8750 INCHES NOMINAL | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE | | LUBRICATION MATERIAL | GREASE | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL BALL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL SHAFT | | INNER RING WIDTH | 0.5930 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.375 INCHES | | OUTER RING WIDTH | 0.4380 INCHES NOMINAL | | OVERALL LENGTH | 2.3440 INCHES NOMINAL | | OVERALL OUTSIDE DIAMETER | 0.9380 INCHES NOMINAL | | SEAL QUANTITY | 2 | | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL | | SELF-ALIGNMENT LOCATION | INTERNAL | | SHANK DIAMETER | 0.3750 INCHES NOMINAL | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.1250 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL | | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNF |
|
|