|
|
|
National Stock Number:
3110-00-157-6097
Federal Supply Class:
3110
National Item Identification Number:
001576097
Description:
BEARING,BALL,DUPLEX
Detail:
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.
|
Manufacturer Information:
| 203-006-0001 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 9159897 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | BACB10A145 | 02758 | U S BEARINGS | | BACB10A145 | 06144 | INDUSTRIAL TECTONICS BEARINGS CORPORATION | | BACB10A145 | 09455 | RBC TRANSPORT DYNAMICS CORP | | B-6326-1 | 32828 | KAYDON CORPORATION | | BACB10A145 | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | BACB10A145 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | BACB10A145 | 32828 | KAYDON CORPORATION | | BACB10A145 | 3NPS1 | RBC AIRCRAFT PRODUCTS, INC. | | BACB10A145 | 56644 | TIMKEN AURORA BEARING COMPANY | | BACB10A145 | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. | | BACB10A145 | 81205 | THE BOEING COMPANY | | BACB10A145 | 81376 | RBC SOUTHWEST PRODUCTS, INC. | | Y64PW1 | 21335 | TIMKEN CO | | Y64PW1CRD8 | 21335 | TIMKEN CO | | Y64PW1CRDB | 21335 | TIMKEN CO | | Y64PW1CRDBFS134 | 21335 | TIMKEN CO | | Y64PW1CRDBFSB4 | 21335 | TIMKEN CO | | Y64PW1DBFS10160X | 21335 | TIMKEN CO | | Y64PWI | 21335 | TIMKEN CO | | Y64PWICRDBFS160 | 21335 | TIMKEN CO | | Y64PWIDB | 21335 | TIMKEN CO | | Y64PWIDBFS50160X | 21335 | TIMKEN CO | | Y64PWIFS10160X | 21335 | TIMKEN CO | | BACB10A145 | 97613 | SARGENT AEROSPACE & DEFENSE, LLC | | BACB10A145 | J1011 | MINEBEA MITSUMI INC. | | BACB10A145 | S0352 | MINEBEA MITSUMI INC. |
|
Techincal Specification:
| BEARING PRELOAD DESIGNATION | LIGHT | | BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 4.0000 INCHES NOMINAL | | LOAD DIRECTION | RADIAL | | OVERALL OUTSIDE DIAMETER | 5.1250 INCHES NOMINAL | | OVERALL WIDTH | 0.6250 INCHES NOMINAL | | RETAINER FABRICATION METHOD | MACHINED | | SEAL QUANTITY | 1 | | SPECIAL FEATURES | SEAL RETAINED BY PLASTIC SNAP RING,CADMIUM EXPOSED SURFACES,PAIR OF BEARINGS MOUNTED ON SIDE OPPOSITE SEAL | | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 | | STYLE DESIGNATOR | UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE | | SURFACE FINISH | GROUND |
|
|