|
|
|
National Stock Number:
3040-01-626-8160
Federal Supply Class:
3040
National Item Identification Number:
016268160
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 596-7411276-16 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 596-7551454-2 | 53711 | NAVAL SEA SYSTEMS COMMAND | | B553-9200-16 | 96169 | ELECTRIC BOAT CORPORATION | | B553-9212-2 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.995 INCHES MINIMUM AND 2.997 INCHES MAXIMUM | | FIRST END SPLINE LENGTH | 4.13 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 2.995 INCHES MINIMUM AND 2.997 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 2.558 INCHES MINIMUM AND 2.573 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 9 | | FIRST END STYLE | SPLINED (STRAIGHT) | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FORM 2,COND ANL;AH FINISH A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY R-405 | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,RAIL,DRIVE LINK | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 34.785 INCHES MINIMUM AND 34.905 INCHES MAXIMUM | | SECOND END DIAMETER | 2.995 INCHES MINIMUM AND 2.997 INCHES MAXIMUM | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 12.13 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 2.995 INCHES MINIMUM AND 2.997 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 2.558 INCHES MINIMUM AND 2.573 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 9 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|