|
|
|
National Stock Number:
3040-01-626-5740
Federal Supply Class:
3040
National Item Identification Number:
016265740
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 16172 | 06177 | PNEUDRAULICS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END BEARING SEAT DIAMETER | 0.450 INCHES MINIMUM AND 0.460 INCHES MAXIMUM | | FIRST END BEARING SEAT LENGTH | 0.060 INCHES NOMINAL | | FIRST END DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | FIRST END DISTANCE FROM BEARING SEAT TO END | 0.020 INCHES NOMINAL | | FIRST END STYLE | BEARING SEAT | | LARGEST STEP DIAMETER | 0.450 INCHES MINIMUM AND 0.460 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, CONDITION H FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPRING GUIDE | | OVERALL LENGTH | 0.155 INCHES MINIMUM AND 0.165 INCHES MAXIMUM | | SECOND END DIAMETER | 0.24 INCHES MINIMUM AND 0.26 INCHES MAXIMUM | | SECOND END STYLE | PLAIN | | SPECIAL FEATURES | SHAFT HAS A 0.030 INCH DIAMETER THRU HOLE. SHAFT IS PASSIVATED PER MIL-S-5002. | | STEP QUANTITY | 1 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|