|
|
|
National Stock Number:
3040-01-623-7392
Federal Supply Class:
3040
National Item Identification Number:
016237392
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 62199A | 73760 | ITT AEROSPACE CONTROLS LLC |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ALUMINUM ALLOY 2024-T4 IAW QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | GUIDE,SPRING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 0.210 INCHES MINIMUM AND 0.215 INCHES MAXIMUM | | SECOND END DIAMETER | 0.295 INCHES MINIMUM AND 0.300 INCHES MAXIMUM | | SECOND END HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM | | STEP QUANTITY | 1 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|