|
|
|
National Stock Number:
3040-01-623-0162
Federal Supply Class:
3040
National Item Identification Number:
016230162
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 596-7551510-61 | 53711 | NAVAL SEA SYSTEMS COMMAND | | B831-9242-61 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.6692 INCHES MINIMUM AND 0.6695 INCHES MAXIMUM | | FIRST END WIDTH ACROSS FLATS | 0.500 INCHES NOMINAL | | LARGEST STEP DIAMETER | 0.850 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-S-5000, CONDITION E ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP E4340 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, DRIVER | | OVERALL LENGTH | 4.013 INCHES NOMINAL | | SECOND END DIAMETER | 0.6692 INCHES MINIMUM AND 0.6695 INCHES MAXIMUM | | SECOND END WIDTH ACROSS FLATS | 0.500 INCHES NOMINAL | | SPECIAL FEATURES | KEYWAY CUT IN 1.25 IN. LONG CENTER SECTION | | STEP QUANTITY | 5 |
|
|