|
|
|
National Stock Number:
3040-01-611-2743
Federal Supply Class:
3040
National Item Identification Number:
016112743
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 537687 | 73030 | HAMILTON SUNDSTRAND CORPORATION | | 573687 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1884 INCHES MINIMUM AND 0.1886 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.1735 INCHES MINIMUM AND 0.1765 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, BEARING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.360 INCHES NOMINAL | | SECOND END DIAMETER | 0.1291 INCHES MINIMUM AND 0.1294 INCHES MAXIMUM | | SECOND END STYLE | PLAIN |
|
|