|
|
|
National Stock Number:
3040-01-608-2841
Federal Supply Class:
3040
National Item Identification Number:
016082841
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 3197904 | 45152 | OSHKOSH CORP | | 3197904 | 75Q65 | OSHKOSH DEFENSE LLC |
|
Techincal Specification:
| FIRST END DIAMETER | 1.497 INCHES MINIMUM AND 1.500 INCHES MAXIMUM | | FIRST END TAPER LENGTH | 0.12 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 45.0 DEGREES NOMINAL | | FIRST END STYLE | PLAIN | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,ROLLER | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 9.00 INCHES NOMINAL | | SECOND END DIAMETER | 0.12 INCHES NOMINAL | | SECOND END INTERNAL THREAD LENGTH | 4.75 INCHES NOMINAL | | SECOND END STYLE | SLOTTED AND INTERNALLY THREADED | | SECOND END PRESSURE ANGLE | 45.0 DEGREES NOMINAL | | SECOND END SLOT DEPTH | 0.31 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.31 INCHES NOMINAL | | SPECIAL FEATURES | THREAD DIA: 0.399 BY 12 NPT;DRILLED HOLE,CENTER HOLE DISTANCE TO SECOND END 0.450 INCH NOMINAL;DRILLED HOLE DIA: 0.250 INCH NOMINAL,DRILLED HOLE DEPTH: 1.00 INCH NOMINAL |
|
|