|
|
|
National Stock Number:
3040-01-605-7967
Federal Supply Class:
3040
National Item Identification Number:
016057967
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| R8506603-SP102 | 56161 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION | | R8506603-SP102 | SDQ79 | LAND SYSTEMS GEAR RATIO | | SA073083-SP301 | SZ177 | DENEL VEHICLE SYSTEMS |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DISTANCE FROM END TO FLAT | 147.0 MILLIMETERS NOMINAL | | FIRST END GROOVE DIAMETER | 54.4 MILLIMETERS NOMINAL | | FIRST END SPLINE QUANTITY | 17 | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 413.0 MILLIMETERS NOMINAL | | SECOND END DIAMETER | 54.4 MILLIMETERS NOMINAL | | SECOND END DISTANCE FROM END TO FLAT | 243.0 MILLIMETERS NOMINAL | | SECOND END SPLINE QUANTITY | 17 | | STEP QUANTITY | 4 |
|
|