|
|
|
National Stock Number:
3040-01-602-7711
Federal Supply Class:
3040
National Item Identification Number:
016027711
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10020195 | 1EFH8 | GENERAL DYNAMICS LAND SYSTEMS - FORCE PROTECTION INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 11.46 MILLIMETERS MINIMUM AND 11.48 MILLIMETERS MAXIMUM | | FIRST END EXTERNAL THREAD LENGTH | 18.00 MILLIMETERS NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 11.46 MILLIMETERS MINIMUM AND 11.48 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | FPI-SPEC-100 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | ROD,CONNECTOR | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 165.00 MILLIMETERS NOMINAL | | SECOND END DIAMETER | 9.00 MILLIMETERS NOMINAL | | SECOND END STEP LENGTH | 50.0 MILLIMETERS NOMINAL | | SECOND END STYLE | TONGUE | | SECOND END TONGUE THICKNESS | 7.98 MILLIMETERS MINIMUM AND 7.99 MILLIMETERS MAXIMUM | | SECOND END TONGUE WIDTH | 9.00 MILLIMETERS NOMINAL | | SPECIAL FEATURES | FIRST END THREAD SIZE IS M10 X 1.5; REFER TO DRAWING FOR ADDITIONAL DETAILS | | STEP QUANTITY | 1 |
|
|