|
|
|
National Stock Number:
3040-01-595-9408
Federal Supply Class:
3040
National Item Identification Number:
015959408
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 8615-1007-00 | 0772A | ELBIT SYSTEMS ELECTRO-OPTICS ELOP LTD | | 8615-1007-00 | S6070 | ELBIT SYSTEMS ELECTRO-OPTICS ELOP LTD. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | LARGEST STEP DIAMETER | 4.6 MILLIMETERS NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 36.0 MILLIMETERS NOMINAL | | SPECIAL FEATURES | STEPS: 6;FIRST STEP DIA: 3.54 MM,NOMINAL;SECOND STEP DIA: 2.24 MM,MINIMAL,2.30 MM,MAXIMUM;THIRD STEP DIA: 3.54 MM,NOMINAL;FOURTH STEM DIA: 2.2 MM MINIMAL,2.3 MM MAXIMUM;FIFTH STEP DIA: 3.54 MM,NOMINAL;SIXTH STEP DIA: 4.60 MM,NOMINAL;FIRST END ANGLE TO FIRST STEP: 30 DEGRESS,NOMINAL;ANGLE BETWEEN THIRD STEP AND FOURTH STEP: 40 DEGREES,NOMINAL;ANGLE BETWEEN FOURTH STEP AND FIFTH STEP: 40 DEGREES NOMINAL;SIXTH STEP ANGLE TO SECOND END: 45 DEGREES,NOMINAL |
|
|