|
|
|
National Stock Number:
3040-01-593-8788
Federal Supply Class:
3040
National Item Identification Number:
015938788
Description:
CONNECTING LINK,RIGID
Detail:
An item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
|
Manufacturer Information:
| 955AS307-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 955AS307-1 | 51744 | BETA FUELING SYSTEMS, LLC |
|
Techincal Specification:
| END ATTACHMENT HOLE DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS | | END ATTACHMENT LENGTH | 2.000 INCHES NOMINAL BOTH ENDS | | END ATTACHMENT STYLE | RAISED FACE, ROUND BOTH ENDS | | END ATTACHMENT WIDTH | 0.750 INCHES NOMINAL BOTH ENDS | | BODY CONSTRUCTION | TUBULAR | | PART NAME ASSIGNED BY CONTROLLING AGENCY | DRAW BAR ASSEMBLY | | MATERIAL | STEEL | | SPECIAL FEATURES | OVERALL LENGTH "AS REQUIRED". ROD ENDS, SPHERICAL - EXTERNAL THREADED; THREADS 1/4 - 28 UNF; ROD END, PIVITAL BUSHING 0.375 THICK (FROM ONE SIDE OF THE WHOLE TO THE OTHER); FLAT FACE OF ROD END 0.0.281 THICK, SOLID; THREAD LENGTH 1.000; THREADED END OF ROD END TO THE CENTER OF THE HOLE IN PIVITAL BUSHING 1 9/16; DRAW BAR TUBE 5 1/8L X 0.375DIA; ENDS OF TUBE DRILLED/TAPPED 0.213 DIA X 1.500 DEEP. TAP - 1/4-28 UNF X 1.000 DEEP FULL THREAD CHAMPHER 1ST THREAD AT 45.0. FINISH - DRAW BAR TUBE IAW MIL-STD-808, F-100 DG, TYPE 1. DRAW BAR ASSEMBLY - ROD END ADJUSTMENT FROM DRAW BAR TUBE TO CENTER OF HOLE IN ROD END - MAX 1 1/8 (TYP). | | SURFACE TREATMENT | CADMIUM |
|
|