|
|
|
National Stock Number:
3040-01-551-7358
Federal Supply Class:
3040
National Item Identification Number:
015517358
Description:
AXLE,SHOULDERED
Detail:
An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 8H-A30047 | 064S4 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | TYUW14350A | 064S4 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 66.0 MILLIMETERS NOMINAL | | FIRST END HOLE DEPTH | 56.0 MILLIMETERS NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 66.0 MILLIMETERS NOMINAL | | MATERIAL | ALUMINUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | ELEVATION LEFT AXLE | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 317.0 MILLIMETERS NOMINAL | | SPECIAL FEATURES | ALLOY 7050-T7451 5 INCH PLATE; END HAS SQUARE FLANGE WITH FOUR THREADED BOLT HOLES, .875-14 UNF 2B; SHAFT HAS TWO DIAMETER 56 AND 66 MM | | SECOND END DIAMETER | 56.0 MILLIMETERS NOMINAL | | SECOND END HOLE DEPTH | 56.0 MILLIMETERS NOMINAL | | SECOND END HOLE DIAMETER | 17.0 MAJOR INCHES | | SECOND END DISTANCE FROM HOLE CENTER TO END | 16.0 MILLIMETERS NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | STEP QUANTITY | 5 |
|
|