|
|
|
National Stock Number:
3040-01-445-2402
Federal Supply Class:
3040
National Item Identification Number:
014452402
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 22-06663 ITEM 1 | A236N | MACGREGOR SWEDEN AB - GOTEBORG | | 22-06663 ITEM 1 | S8828 | MACGREGOR SWEDEN AB | | 589-6952613 ITEM 1 | A236N | MACGREGOR SWEDEN AB - GOTEBORG | | 589-6952613 ITEM 1 | S8828 | MACGREGOR SWEDEN AB | | 22-06664 ITEM 2 | S8828 | MACGREGOR SWEDEN AB | | 589-6952613 | S8828 | MACGREGOR SWEDEN AB |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 200.0 MILLIMETERS NOMINAL | | FIRST END STYLE | PLAIN | | MATERIAL | STEEL CORROSION RESISTING | | OVERALL LENGTH | 430.0 MILLIMETERS NOMINAL | | SECOND END DIAMETER | 22.0 MILLIMETERS NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SPECIAL FEATURES | FIRST END RESESSED SLOT 22.0MM DEEP, 70.0MM LG, 30.0MM W, LOCATED 30.0MM OFF CENTER; SECOND END HOLE IS SLOTED | | SURFACE FINISH | 12.5 MICROINCHES |
|
|