|
|
|
National Stock Number:
3040-01-441-2419
Federal Supply Class:
3040
National Item Identification Number:
014412419
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| BH00947729 | 27005 | BOSCH REXROTH CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.0000 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 27.5 MILLIMETERS NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.0000 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 15 | | FIRST END STYLE | SPLINED (INVOLUTE) | | FIRST END PITCH DIAMETER | 0.9375 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | MATERIAL | STEEL | | SPECIAL FEATURES | ONE HOLE CENTRALLY LOCATED ON SHAFT END,DRILLED 1/4-20 UNC-2B,SHAFT BODY SPLINED IN CENTER | | STEP QUANTITY | 6 |
|
|