|
|
|
National Stock Number:
3040-01-435-1512
Federal Supply Class:
3040
National Item Identification Number:
014351512
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 211068684 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6405354 | 53711 | NAVAL SEA SYSTEMS COMMAND | | DF330725 FN 25 | 43689 | HUNTINGTON INGALLS INC | | 801-6405354 FIND 25 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 7.0000 INCHES NOMINAL | | DISTANCE BETWEEN FORK INSIDE SPREAD | 1.3900 INCHES NOMINAL | | LINK END HOLE DIAMETER | 1.0010 INCHES NOMINAL | | LINK END THICKNESS | 3.7500 INCHES NOMINAL | | MAJOR DIAMETER | 4.4985 INCHES NOMINAL | | MATERIAL | COPPER ALLOY | | MINOR DIAMETER | 3.8685 INCHES NOMINAL | | SHAFT END THICKNESS | 4.3750 INCHES NOMINAL | | SHAFT SECURING METHOD | SPLINE | | SPECIAL FEATURES | OFFSET HEIGHT: 0.3125 IN. NOMINAL | | SPLINE QUANTITY | 9 | | STYLE DESIGNATOR | CLEVIS LINK END, SECURING HOLE(S) SHAFT END |
|
|