|
|
|
National Stock Number:
3040-01-431-6697
Federal Supply Class:
3040
National Item Identification Number:
014316697
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5000904 | 15852 | W S DARLEY & CO | | B102-4 | 15852 | W S DARLEY & CO | | B229 | 15852 | W S DARLEY & CO | | B229 REP NO.26 | 15852 | W S DARLEY & CO |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.4970 INCHES MINIMUM AND 1.5030 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.497 INCHES MINIMUM AND 1.503 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A276 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 316 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 5.313 INCHES NOMINAL | | SECOND END DIAMETER | 0.5000 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | SECOND END STYLE | EXTERNAL THREADED | | SPECIAL FEATURES | 3/16 IN. DIA THRU HOLE ONE SIDE FIRST END; TWO 7/64 IN. DIA THRU HOLES 90.0 DEG APART SECOND END; 1.000 IN. ID 3.015 IN. DEEP FIRST END W/1.398 IN. CBORE 0.812 IN. DEEP | | STEP QUANTITY | 4 | | SURFACE FINISH | 10.0 MICROINCHES |
|
|