|
|
|
National Stock Number:
3040-01-428-3196
Federal Supply Class:
3040
National Item Identification Number:
014283196
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 211069179 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 595-6401267 ITEM 19 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 595-6401597-1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6401267 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6401597 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.1250 INCHES NOMINAL | | FIRST END STEP LENGTH | 0.3800 INCHES NOMINAL | | FIRST END STYLE | HEXAGONAL | | FIRST END WIDTH ACROSS FLATS | 0.3800 INCHES NOMINAL | | LARGEST STEP DIAMETER | 1.1250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 COND ANL FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | OVERALL LENGTH | 2.2000 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.6180 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.2000 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.2470 INCHES NOMINAL | | SECOND END DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.8800 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.5050 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.8800 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED, CROSS DRILLED HOLE, AND EXTERNALLY THREADED | | STEP QUANTITY | 2 |
|
|