|
|
|
National Stock Number:
3040-01-426-7881
Federal Supply Class:
3040
National Item Identification Number:
014267881
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 23-06110 | 0H7R3 | MACGREGOR USA INC. | | 23-06110 | A236N | MACGREGOR SWEDEN AB - GOTEBORG | | 589-6953255 ITEM 3 REV C | 94421 | MILITARY SEALIFT COMMAND | | 589-6953261 | 94421 | MILITARY SEALIFT COMMAND | | 23-06110 | S8828 | MACGREGOR SWEDEN AB | | 589-6953255 ITE | S8828 | MACGREGOR SWEDEN AB |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 37.5 MILLIMETERS NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 40.0 MILLIMETERS NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | OVERALL LENGTH | 171.0 MILLIMETERS NOMINAL | | SECOND END GROOVE DIAMETER | 30.8 MILLIMETERS NOMINAL | | SECOND END GROOVE WIDTH | 4.0 MILLIMETERS NOMINAL | | SECOND END DIAMETER | 35.7 MILLIMETERS NOMINAL | | SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 7.0 MILLIMETERS NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 38.0 MILLIMETERS NOMINAL | | SECOND END STYLE | TWO CIRCULAR GROOVES | | STEP QUANTITY | 3 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|