|
|
|
National Stock Number:
3040-01-425-3833
Federal Supply Class:
3040
National Item Identification Number:
014253833
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 92007A0386 | 01365 | MARINE CORPS LOGISTICS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE-MICC LOGISTICS OPERATIONS CENTER | | 92007A0386 | 05606 | GENERAL DYNAMICS-OTS, INC. | | 92007A0386 | 0C9L5 | GENERAL DYNAMICS LAND SYSTEMS CUSTOMER SERVICE & SUPPORT COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.5540 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 0.5540 INCHES NOMINAL | | FIRST END DIAMETER | 0.4550 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.4830 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0900 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED | | LARGEST STEP DIAMETER | 1.9570 INCHES NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 14.6300 INCHES NOMINAL | | SECOND END DIAMETER | 0.4050 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0900 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0960 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.8640 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.2700 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.8640 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.4290 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED, CROSS DRILLED HOLE, AND EXTERNALLY THREADED | | SPECIAL FEATURES | SLINED ON 1ST END, 23 TEETH, 30 DE P.A. | | STEP QUANTITY | 8 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|