|
|
|
National Stock Number:
3040-01-421-3398
Federal Supply Class:
3040
National Item Identification Number:
014213398
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 540-0217 | 00672 | GRIMES AEROSPACE CO | | 540-0217-1 | 00672 | GRIMES AEROSPACE CO |
|
Techincal Specification:
| III MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | MINOR DIAMETER | 0.295 INCHES NOMINAL | | OVERALL WIDTH | 0.810 INCHES NOMINAL | | SHAFT END THICKNESS | 0.410 INCHES NOMINAL | | SHAFT SECURING METHOD | SPLINE | | SPECIAL FEATURES | FINISH PER QQ-P-35, HEAT TREATED TO COND. H1025, RH36-43C, SPLINE BORE 14 TEETH ON 15 TEETH BASIS ONE SPACE OMITTED | | SPLINE QUANTITY | 14 | | STYLE DESIGNATOR | TWO HOLES LINK END, CLAMP TYPE SHAFT END | | SURFACE TREATMENT | PASSIVATE | | BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.125 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.190 INCHES NOMINAL | | LINK END THICKNESS | 0.410 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643, 17-4PH ASSN STD SINGLE MATERIAL RESPONSE |
|
|