3040-01-416-1151, SHAFT,SHOULDERED

National Stock Number:
3040-01-416-1151

Federal Supply Class:
3040

National Item Identification Number:
014161151

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Manufacturer Information:

178 0373-801	S8829	CARGOTEC SWEDEN AB - MACGREGOR CRANES
178 0373-801 IT 016	A184N	CARGOTEC SWEDEN AB - MACGREGOR CRANES
378 0227-001	0H7R3	MACGREGOR USA INC.
378-0227-001	A184N	CARGOTEC SWEDEN AB - MACGREGOR CRANES
178 0373-801 IT 016	S8829	CARGOTEC SWEDEN AB - MACGREGOR CRANES
378 0227-001	S8829	CARGOTEC SWEDEN AB - MACGREGOR CRANES
3780227-001	A094N	BOSCH REXROTH AKTIEBOLAG
3780227-001	S8805	HAGGLUNDS DRIVE PRODUCTION AB
3780227	S8829	CARGOTEC SWEDEN AB - MACGREGOR CRANES

Techincal Specification:

CRITICALITY CODE JUSTIFICATION	FEAT
END SIMILARITY	NOT IDENTICAL
FIRST END DIAMETER	24.0000 MILLIMETERS NOMINAL
FIRST END DISTANCE FROM END TO GROOVE	26.0000 MILLIMETERS NOMINAL
FIRST END GROOVE DIAMETER	19.6000 MILLIMETERS NOMINAL
FIRST END GROOVE WIDTH	8.0000 MILLIMETERS NOMINAL
FIRST END STYLE	CIRCULAR GROOVED AND EXTERNALLY THREADED
LARGEST STEP DIAMETER	60.0000 MILLIMETERS NOMINAL
PROPRIETARY CHARACTERISTICS	PACS
OVERALL LENGTH	34.7000 MILLIMETERS NOMINAL
SECOND END DIAMETER	60.0000 MILLIMETERS NOMINAL
SECOND END GROOVE DIAMETER	57.0000 MILLIMETERS NOMINAL
SECOND END GROOVE WIDTH	2.6500 MILLIMETERS NOMINAL
SECOND END HOLE DIAMETER	12.0000 MILLIMETERS NOMINAL
SECOND END DISTANCE FROM HOLE CENTER TO END	10.0000 MILLIMETERS NOMINAL
SECOND END STYLE	CROSS DRILLED AND CIRCULAR GROOVED
SPECIAL FEATURES	WEAPON SYSTEM ESSENTIAL
STEP QUANTITY	5
SURFACE FINISH	2.5 MICROINCHES

Click here to Register for Free 30-day Trial