|
|
|
National Stock Number:
3040-01-413-8263
Federal Supply Class:
3040
National Item Identification Number:
014138263
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 585-5361566 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 585-5361566 ITEM 3 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END STYLE | TAPERED WITH FLAT | | FIRST END TAPER LENGTH | 0.2050 INCHES NOMINAL | | FIRST END TAPER MAJOR DIAMETER | 0.6520 INCHES NOMINAL | | FIRST END TAPER | 0.2350 PER FOOT IN INCHES | | LARGEST STEP DIAMETER | 0.1200 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-24059 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY 632 | | OVERALL LENGTH | 5.5000 INCHES NOMINAL | | SECOND END ANGLE BETWEEN HOLES | 180.0 DEGREES NOMINAL | | SECOND END DIAMETER | 0.1200 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1870 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.2500 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.5000 INCHES NOMINAL | | SECOND END STYLE | TWO CROSS DRILLED HOLES AND EXTERNALLY THREADED | | STEP QUANTITY | 2 |
|
|