|
|
|
National Stock Number:
3040-01-407-9326
Federal Supply Class:
3040
National Item Identification Number:
014079326
Description:
AXLE,STRAIGHT
Detail:
A STRAIGHT AXLE HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS USED TO TRANSMIT MOTION SEE SHAFT, STRAIGHT. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE AXLE(1), SHOLDERED. EXCLUDES SHAFT(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 5210428 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 3.2488 INCHES MINIMUM AND 3.2494 INCHES MAXIMUM | | FIRST END STYLE | INTERNAL THREADED | | FIRST END INTERNAL THREAD LENGTH | 0.310 INCHES NOMINAL | | OVERALL LENGTH | 6.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-16343 MIL STD ALL MATERIAL RESPONSES | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.690 INCHES NOMINAL | | SECOND END DIAMETER | 3.2488 INCHES MINIMUM AND 3.2494 INCHES MAXIMUM | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SECOND END HOLE DEPTH | 0.440 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.5600 INCHES NOMINAL | | SPECIAL FEATURES | MATERIAL:SEAMLESS STEEL TUBING CASE HARDENED,FIRST END HOLE 1/8-27 NPT .31 IN DEEP MAX,CROSS DRILLED HOLE AT FIRST END .213 DIA X .25 IN DEEP,3 HOLES SPACED 1.35 IN AT CENTER .062 DIA X .25 IN DEEP | | SURFACE FINISH | 125.0 MICROINCHES |
|
|