|
|
|
National Stock Number:
3040-01-396-1392
Federal Supply Class:
3040
National Item Identification Number:
013961392
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| DAA7252G801-043 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | DAA7252G801-043 | 80378 | TRIUMPH AEROSTRUCTURES, LLC |
|
Techincal Specification:
| BORE DIAMETER | 1.6250 INCHES MINIMUM AND 1.6265 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4130 | | OUTSIDE DIAMETER | 2.125 INCHES NOMINAL | | SMALL END DIAMETER | 1.753 INCHES MINIMUM AND 1.758 INCHES MAXIMUM | | SPECIAL FEATURES | LARGEST END HAS 0.280 IN.WIDE BY 0.198 IN.DEEP KEYWAY;COLLAR IS EXTERNALLY THREADED,12 UN-2A LEFT HAND | | STYLE DESIGNATOR | ROUND STEPPED | | THICKNESS | 0.750 INCHES NOMINAL |
|
|