|
|
|
National Stock Number:
3040-01-393-2193
Federal Supply Class:
3040
National Item Identification Number:
013932193
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| PE014009 | 63050 | WHITE HYDRAULICS INC | | RE014009 | 63050 | WHITE HYDRAULICS INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.2890 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 1.2000 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.3590 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.2890 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.0510 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 12 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 1.2890 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | RE014992 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | CAST IRON | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 4.114 INCHES NOMINAL | | SECOND END DIAMETER | 1.2890 INCHES NOMINAL | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 1.2000 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.5890 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.2890 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 1.0510 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 12 | | SPECIAL FEATURES | DRIVE LINK IN A HYDRAULIC PUMP | | STEP QUANTITY | 2 |
|
|