|
|
|
National Stock Number:
3040-01-389-9060
Federal Supply Class:
3040
National Item Identification Number:
013899060
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 211037392 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 437-6404367 FIND 3 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 437-6404367-3 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6200 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.120 INCHES NOMINAL | | OVERALL LENGTH | 1.120 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CL 304 COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL | | SECOND END DIAMETER | 0.4990 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1010 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.1600 INCHES NOMINAL | | SECOND END STYLE | TWO CROSS DRILLED HOLES | | SPECIAL FEATURES | SECOND END HAS PARTIAL BORE | | STEP QUANTITY | 3 |
|
|