3040-01-389-6791, SHAFT,SHOULDERED

National Stock Number:
3040-01-389-6791

Federal Supply Class:
3040

National Item Identification Number:
013896791

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Manufacturer Information:

2660-1635-02

04320

CURTISS-WRIGHT CONTROLS INTEGRATED SENSING, INC.

Techincal Specification:

END SIMILARITY	NOT IDENTICAL
EXTERNAL KEYWAY LENGTH	0.875 INCHES NOMINAL FIRST END
FIRST END DISTANCE FROM END TO GROOVE	0.548 INCHES NOMINAL
FIRST END DISTANCE FROM KEYWAY CENTER TO END	1.126 INCHES NOMINAL
FIRST END EXTERNAL THREAD LENGTH	0.500 INCHES NOMINAL
FIRST END GROOVE DIAMETER	0.4400 INCHES NOMINAL
FIRST END GROOVE WIDTH	0.0950 INCHES NOMINAL
FIRST END DIAMETER	0.4260 INCHES MINIMUM AND 0.4310 INCHES MAXIMUM
FIRST END STYLE	CIRCULAR GROOVED WOODRUFF KEYWAY AND EXTERNALLY THREADED
FIRST END KEYWAY WIDTH	0.1240 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM
LARGEST STEP DIAMETER	0.973 INCHES MINIMUM AND 0.975 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AISI4340 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL COMP 4340
OVERALL LENGTH	7.293 INCHES NOMINAL
SECOND END GROOVE DIAMETER	0.4450 INCHES MINIMUM AND 0.4550 INCHES MAXIMUM
SECOND END DIAMETER	0.6826 INCHES MINIMUM AND 0.6926 INCHES MAXIMUM
SECOND END DISTANCE FROM END TO GROOVE	0.400 INCHES MINIMUM
SECOND END SPLINE LENGTH	0.400 INCHES NOMINAL
SECOND END SPLINE MAJOR DIAMETER	0.8450 INCHES MINIMUM AND 0.8500 INCHES MAXIMUM
SECOND END SPLINE QUANTITY	16
SECOND END STYLE	CIRCULAR GROOVED AND SPLINED (STRAIGHT)
STEP QUANTITY	9

Click here to Register for Free 30-day Trial