|
|
|
National Stock Number:
3040-01-387-5159
Federal Supply Class:
3040
National Item Identification Number:
013875159
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| LVK6/21-OP2 | 64261 | R M MATERIALS HANDLING INC | | LVK6/21-OP2 | A029G | KONE INDUSTRIAL OY | | LVK6/25 ITEM 3 | A029G | KONE INDUSTRIAL OY | | LVK6/25 ITEM 3 | S4599 | KONE OYJ HYVINKAAN TEHTAAT | | LVK6/21-OP2 | S4599 | KONE OYJ HYVINKAAN TEHTAAT |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END GROOVE DIAMETER | 32.0 MILLIMETERS NOMINAL | | FIRST END GROOVE WIDTH | 9.0 MILLIMETERS NOMINAL | | FIRST END DIAMETER | 45.0 MILLIMETERS NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 7.0 MILLIMETERS NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 70.0 MILLIMETERS NOMINAL | | OVERALL LENGTH | 198.0 MILLIMETERS NOMINAL | | MATERIAL | STEEL | | STEP QUANTITY | 7 |
|
|