|
|
|
National Stock Number:
3040-01-384-3069
Federal Supply Class:
3040
National Item Identification Number:
013843069
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 12132F18 ITEM 10 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 12132F18 ITEM 10 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 12132F18 ITEM 10Q3 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 12132F18-10Q3 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 12132F18-10 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 12132F18-10 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 12281F18Q3 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | PL-12132F18 ITEM 10Q3 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | PL-12132F18 ITEM 10 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 12281F18 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 12281F18 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | PL-12132F18 ITEM 10 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | ZZZY | | END SIMILARITY | IDENTICAL | | OVERALL LENGTH | 19.880 INCHES NOMINAL | | MATERIAL | NICKEL ALLOY | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | ITEMS THAT SUPPORT A LEVEL I OR SUBSAFE CRITICAL SYSTEM/COMPONENT THAT HAS UNDERGONE QUALITY ASSURANCE DURING THE ACQUISITION PROCESS AND REQUIRES OBJECTIVE QUALITY EVIDENCE (OQE) TRACEABLE TO PERMANENT MARKING ON THE MATERIAL | | STEP QUANTITY | 3 |
|
|