|
|
|
National Stock Number:
3040-01-321-4673
Federal Supply Class:
3040
National Item Identification Number:
013214673
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 8J3870 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| BORE DIAMETER | 1.000 INCHES NOMINAL | | BORE LENGTH | 1.250 INCHES NOMINAL | | BORE TYPE | PLAIN STRAIGHT | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 3.400 INCHES NOMINAL | | FEATURES PROVIDED | KEYWAY | | KEYWAY LENGTH | 1.250 INCHES NOMINAL | | KEYWAY WIDTH | 0.158 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.391 INCHES NOMINAL | | LINK END THICKNESS | 0.312 INCHES NOMINAL | | III MATERIAL | IRON CAST | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL WIDTH | 1.500 INCHES NOMINAL | | SHAFT END THICKNESS | 1.250 INCHES NOMINAL | | SHAFT SECURING METHOD | KEYWAY | | SPECIAL FEATURES | CLAMPING FEATURE ON SHAFT END IS STRAIGHT,NOT ANGLED AS IN STYLE 11; OFFSET HEIGHT: 1.340 IN. NOMINAL | | STYLE DESIGNATOR | OFFSET, ONE HOLE LINK END, CLAMP TYPE SHAFT END |
|
|