|
|
|
National Stock Number:
3040-01-320-5376
Federal Supply Class:
3040
National Item Identification Number:
013205376
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3526-098 | 66503 | WOODWARD, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM | | FIRST END DIAMETER | 0.1869 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.1660 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0300 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.2496 INCHES MINIMUM AND 0.2499 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5613 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 410 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 0.906 INCHES NOMINAL | | SECOND END DIAMETER | 0.2496 INCHES MINIMUM AND 0.2499 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.368 INCHES MINIMUM AND 0.418 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0300 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM | | SECOND END GROOVE DIAMETER | 0.2190 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 5 |
|
|