|
|
|
National Stock Number:
3040-01-317-2782
Federal Supply Class:
3040
National Item Identification Number:
013172782
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3502544 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3502544-1 | 59364 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.1180 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 1.0417 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.6680 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.0833 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.9831 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 25 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 1.3540 INCHES NOMINAL | | MATERIAL | STEEL COMP 4340 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.9900 INCHES NOMINAL | | SECOND END DIAMETER | 1.3540 INCHES NOMINAL | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 1.2000 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 1.0150 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.2500 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.5862 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 24 | | SPECIAL FEATURES | GROOVE 0.182 IN.WIDE AND 0.920 IN.DIA FIRST END; GROOVE 0.188 IN.WIDE AND 1.146 IN.DIA SECOND END | | STEP QUANTITY | 7 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|