|
|
|
National Stock Number:
3040-01-256-1980
Federal Supply Class:
3040
National Item Identification Number:
012561980
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3867034-1 | 82106 | PARKER-HANNIFIN CORPORATION | | 3867034-1 | 93835 | PARKER HANNIFIN CORPORATION | | 3867034R-1 | 82106 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, INPUT | | SPECIAL FEATURES | Z SHAPED SHAFT 4.995 IN. LG; FIRST END 0.186 IN. DIA, .2500-28UNJF-3A THD; FIRST SHOULDER 0.3742 IN. DIA; SECOND SHOULDER SPLINED 0.4985 IN. DIA, 0.4023 IN. MINOR DIA, 15 TEETH, PITCH 32/64; THIRD SHOULDER 0.62435 IN. DIA; SECOND END 0.594 IN. DIA, GROOVE 0.420 IN. FROM END 0.450 IN. DIA, 0.244 IN. WIDE; BORE 0.254 IN. DIA, 2.050 IN. LG, CBORE 0.525 IN. DIA |
|
|