|
|
|
National Stock Number:
3040-01-255-6199
Federal Supply Class:
3040
National Item Identification Number:
012556199
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 35 79501 3006 4 | 86329 | PARKER-HANNIFIN CORPORATION | | 35-79501-3009-4 | 86329 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.5505 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 1.5000 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.180 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.3350 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.5505 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 24 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 1.551 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 8620 FED STD SINGLE MATERIAL RESPONSE OR AMS 6276 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 4.115 INCHES NOMINAL | | SECOND END DIAMETER | 0.4992 INCHES NOMINAL | | SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.654 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.4805 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0460 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.4500 INCHES NOMINAL | | SECOND END STYLE | TWO CIRCULAR GROOVES | | STEP QUANTITY | 2 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|