|
|
|
National Stock Number:
3040-01-250-6144
Federal Supply Class:
3040
National Item Identification Number:
012506144
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3867039-1 | 82106 | PARKER-HANNIFIN CORPORATION | | 3867039-1 | 93835 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.6230 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.623 INCHES MINIMUM AND 1.654 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT ASSEMBLY, DETENT | | OVERALL LENGTH | 2.590 INCHES NOMINAL | | SECOND END DIAMETER | 1.6540 INCHES NOMINAL | | SPECIAL FEATURES | PER AMS 5659, 15-5PH; PASSIVATE PER PS-13001; CONSISTS OF 1 SHAFT, DETENT, P/N 3867039-3; 2 ROLLER, SPHERICAL, P/N 3831284; 2 SHAFT, ROLLER, P/N 3867040-1; EXTERNAL INVOLUTE SPLINE DATA: 17 TEETH, PITCH 32/64, PRESSURE ANGLE 30 DEG; HEAT TREATMENT H1025 PER PS-15227, MCAIR APPROVED SOURCES MUST BE USED; NHA P/N 3867030 AND IS ON P/N 3867000 | | STEP QUANTITY | 2 |
|
|