|
|
|
National Stock Number:
3040-01-249-1513
Federal Supply Class:
3040
National Item Identification Number:
012491513
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 10106985 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 147739-1 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| BORE TYPE | SERRATED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.000 INCHES NOMINAL | | DISTANCE BETWEEN FORK INSIDE SPREAD | 0.140 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.125 INCHES NOMINAL | | LINK END THICKNESS | 0.320 INCHES NOMINAL | | MAJOR DIAMETER | 0.187 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8, T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | MINOR DIAMETER | 0.177 INCHES NOMINAL | | SERRATION QUANTITY | 36 | | SHAFT END THICKNESS | 0.320 INCHES NOMINAL | | SHAFT SECURING METHOD | SERRATIONS | | SPECIAL FEATURES | ENDS CHAMFERED,09 IN.BY 45 DEGREES | | STYLE DESIGNATOR | CLEVIS LINK END, SECURING HOLE(S) SHAFT END | | SURFACE TREATMENT | ANODIZE |
|
|