|
|
|
National Stock Number:
3040-01-248-4631
Federal Supply Class:
3040
National Item Identification Number:
012484631
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 11-P-135 | 11757 | PARKER HANNIFIN CORPORATION | | 11-P-95 | 11757 | PARKER HANNIFIN CORPORATION | | Y045 765 03 | U0747 | PACCAR PARTS U.K. LIMITED | | 11-P-95 | U1809 | TURNER POWERTRAIN SYSTEMS LTD |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.8100 INCHES MINIMUM AND 0.8110 INCHES MAXIMUM | | FIRST END STYLE | INTERNAL THREADED | | FIRST END INTERNAL THREAD LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD 1ST MATERIAL RESPONSE OR SAE-1524H-J4 22/39 ASSN STD 2ND MATERIAL RESPONSE OR EX-15-J4 27/41 ASSN STD 3RD MATERIAL RESPONSE OR SAE H-J4 27/41 ASSN STD 4TH MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1117 OR STEEL OR STEEL COMP 8620 | | OVERALL LENGTH | 8.940 INCHES MINIMUM AND 8.960 INCHES MAXIMUM | | SPECIAL FEATURES | 4 CURVED GROOVES,1ST GROOVE MINIMUM 2.350 AND MAXIMUM 2.360 FROM END,2ND GROOVE MINIMUM 3.715 AND MAXIMUM 3.725 FROM END,3RD GROOVE MINIMUM 3.965 AND MAXIMUM 3.975 FROM END,4TH GROOVE MINIMUM 6.090 AND MAXIMUM 6.100 FROM END |
|
|