3040-01-215-3540, SHAFT,SHOULDERED

National Stock Number:
3040-01-215-3540

Federal Supply Class:
3040

National Item Identification Number:
012153540

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Manufacturer Information:

3614968-1	81833	AEROCONTROLEX GROUP, INC.
3614968-1	99193	HONEYWELL INTERNATIONAL INC.
3620177-1	99193	HONEYWELL INTERNATIONAL INC.

Techincal Specification:

END SIMILARITY	NOT IDENTICAL
FIRST END DIAMETER	0.6200 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM
FIRST END PITCH DIAMETER	0.7917 INCHES NOMINAL
FIRST END PRESSURE ANGLE	30.0 DEGREES NOMINAL
FIRST END SPLINE LENGTH	0.6700 INCHES MINIMUM AND 0.6900 INCHES MAXIMUM
FIRST END SPLINE MAJOR DIAMETER	0.8160 INCHES MINIMUM AND 0.8210 INCHES MAXIMUM
FIRST END SPLINE MINOR DIAMETER	0.7287 INCHES MINIMUM AND 0.7377 INCHES MAXIMUM
FIRST END SPLINE QUANTITY	19
FIRST END STYLE	SPLINED (INVOLUTE)
LARGEST STEP DIAMETER	0.864 INCHES MINIMUM AND 0.869 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS6470 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL
PROPRIETARY CHARACTERISTICS	PACS
OVERALL LENGTH	3.150 INCHES MINIMUM AND 3.160 INCHES MAXIMUM
SECOND END DIAMETER	0.6200 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM
SECOND END STYLE	SPLINED (INVOLUTE)
SECOND END PITCH DIAMETER	0.7917 INCHES NOMINAL
SECOND END PRESSURE ANGLE	30.0 DEGREES NOMINAL
SECOND END SPLINE LENGTH	0.5000 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM
SECOND END SPLINE MAJOR DIAMETER	0.8160 INCHES MINIMUM AND 0.8210 INCHES MAXIMUM
SECOND END SPLINE MINOR DIAMETER	0.7287 INCHES MINIMUM AND 0.7377 INCHES MAXIMUM
SECOND END SPLINE QUANTITY	19
SPECIAL FEATURES	TWO GROOVES 0.126 IN. NOM WIDTH; TWO HOLES AT 0.77 IN. LNG FROM FIRST END,FOUR HOLES AT 0.900 IN. LNG FROM SECOND END 0.032 IN. DIA THRU
STEP QUANTITY	8

Click here to Register for Free 30-day Trial