|
|
|
National Stock Number:
3040-01-194-1652
Federal Supply Class:
3040
National Item Identification Number:
011941652
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 460906 | 08712 | PRINCE ALEXANDER PARTNERS INC DIV ARCHITECTURE ENGIEERING AND ECONOMIC DEVELOPMENT |
|
Techincal Specification:
| MATERIAL | STEEL COMP 416 | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OR | | AISI 416 ASSN STD SINGLE MATERIAL RESPONSE OR | | SAE 51416 ASSN STD SINGLE MATERIAL RESPONSE | | STYLE DESIGNATOR | ROUND W/SINGLE CHAMFER | | CHAMFER ANGLE IN DEG | 30.0 | | OUTSIDE DIAMETER | 0.875 INCHES NOMINAL | | THICKNESS | 0.438 INCHES NOMINAL | | BORE DIAMETER | 0.2520 INCHES MINIMUM AND | | 0.2530 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.188 INCHES NOMINAL | | SECURING HOLE QUANTITY | 2 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 120.0 | | SECURING HOLE TYPE AND LOCATION | THREADED 1ST HOLE | | UNTHREADED 2ND HOLE | | HOLE DIAMETER AND LOCATION | 0.1360 INCHES NOMINAL 1ST HOLE | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | 1ST HOLE UNC | | NOMINAL THREAD SIZE AND LOCATION | 0.164 INCHES 1ST HOLE | | SUPPLEMENTARY FEATURES | MICROSWITCH TRIP DOG USAGE |
|
|